Training at Ultramag Inspection Services
In partnership with selected B.I.N.D.T. Approved Training Organisation’s and T.W.I, Ultramag offer and host training courses covering PCN, SNT, ICORR and CSWIP along with several radiation safety courses including Source Recovery and Transportation Regulations.
Level 2 and Level 3 personnel carry out all N.D.T. training and our trainers have many years of industry experience and we ensure that each trainer passes on their extensive knowledge and expertise in varying sectors. PCN, CSWIP & ASNT Qualifications all require a period of Recorded Training, Ultramag can provide this at the client’s facility or at our new premises in Rushington.
Where CSCS cards are required by welders for site work, we can perform a Welder Qualification Test along with Job Knowledge questions. Assuming the welder passes, his Welding Certificate and Knowledge results can be submitted to TWI for a CSCS card (along with valid H&S Test results).
- Basic Radiation Safety Level 1 – 8th to 10th May 2024
- Advanced Radiation Safety PCN Level 2 – 8th to 10th May 2024
- Penetrant Testing PCN Level 2 – 20th to 24th May 2024
- Visual Testing PCN Level 2 – 3rd to 7th June 2024
- Appreciation of Conventional NDT Techniques – 24th to 28th June 2024
- Magnetic Particle Testing PCN Level 2 – 16th to 20th September 2024
Ultramag currently offer “VISUAL INSPECTION, On-the-job Training”. This is designed to be delivered at the client’s premises as a type of ‘Toolbox Talk’ and covers basics for visually inspecting a weldment, equipment, joint designs and imperfections associated with welding. This course can be run alongside the “Welding, Job Knowledge” presentation. These courses are run by the Welding Technology Department.
For more details on our courses, check out the Southern Technical Training Centre site
Visual Inspection – On the job training ISO 17637, ISO 14731
Training by: Ultramag Inspection Services Ltd.
Suitable for: Welders, operators, line inspectors and foremen who undertake visual examination of welded joints; quality control staff associated with welding who need basic knowledge in visual inspection.
Course Content: Basic knowledge of how to conduct a visual examination, equipment, your responsibilities, welding imperfections and practices.
Course Objectives: To gain basic knowledge as required in ISO 17637 and ISO 14731
Welding, Job Knowledge ISO 9606, ISO 3834, ISO 24393, ISO 14731
Training by: Ultramag Inspection Services Ltd.
Suitable for: Welders, operators, line inspectors and foremen who undertake welding or examination
of joints; quality control staff associated with welding; all staff who need basic, job knowledge in welding practices.
Course Content: Basic knowledge of welding practices, Welding defects and their causes, Welding processes, Weld repairs, Welding consumables, Safety, Welding symbols & positions and Understanding welding procedures. Multi question paper at the end.
Course Objectives: To gain basic technical and job knowledge as required in ISO 24394, ISO 9606, ISO 3834 and ISO 14731