Weld Procedures

As a third party organisation and test house, one of our services is conducting Welding Procedure Qualification tests and Welder Qualification tests;  along with welding trials and welder training.

For welding procedures & welder tests we use qualified engineering technicians who are Senior Welding Inspectors, CSWIP or AWS Certified Welding Inspectors and IIW Welding Technologists or Specialists. Overseeing this we have a Level 3 BINDT Registered Consultant and an IIW Welding Specialist.

Now that the CE marking requirement is in force, as an Inspection Body we provide technical advice and consultancy for fabricators Welding Co-ordinators working closely with them to comply with the requirements of ISO 3834 and EN 1090. This typically involves establishing and providing NDT and Approving welding procedures, welder qualification tests and welder prolongation.

The main weld procedure & welder qualification tests standards are:

  • EN ISO 15609
  • EN ISO 15613
  • EN ISO 15614
  • EN ISO 9606
  • EN 287
  • AWS D1.1
  • BS 4872
  • ASME IX

 

Contact us for more information on our weld procedure and welder qualification tests services >

Mechanical testing is carried out either In-house or on behalf of Ultramag by
another UKAS approved test laboratory.

We also offer classroom training for welders and welding co-ordinators or practical welder training at your premises followed by testing if required.

Key employee:

Peter Gogan EngTech GInstNDT TechWeldI – International Welding Specialist

Peter is a welding specialist with over 25 years experience in welding, welding procedure qualification tests, weld testing and Quality Control.

NDT Visual Inspection - Ultramag Inspection ServicesPeter is our Senior welding specialist and heads the UKAS accredited Welding Technology department here at Ultramag. He has performed weld procedure and welder qualification tests in a variety of industries including structural steelwork, pressure vessels, pipework, aerospace and general engineering. Peter is also responsible for organising the mechanical testing and welding procedure documentation. He is an engineering technician and a graduate of the British Institute of Non Destructive Testing.

He is also a registered Senior Welding Inspector and International Institute of Welding, International Welding Specialist.

Ultramag NDT weld inspection

Share this page twitterlinkedin